PC Male Straight Plastic Poly Imbotta fit-tubu għal pajp Adapter Konnettur Fittings
| MUDELL | A | B | C | D | E | F | H1(Hex) | H2(Hex) | Piż (g) |
| PC04-M5 | 4 | M5 * 0.8p | 5 | 21.9 | 10 | / | 6.1 | ||
| PC04-M6 | 4 | M6 * 1.0p | 6 | 22.3 | 10 | / | 6.6 | ||
| PC04-01 | 4 | R1/8 | 7.5 | 19.6 | 10 | 3 | 6.1 | ||
| PC04-02 | 4 | R1/4 | 9 | 20.6 | 14 | 3 | 13 | ||
| PC06-M5 | 6 | M5 * 0.8p | 5 | 23.1 | 12 | / | 6.9 | ||
| PC06-M6 | 6 | M6 * 1.0p | 6 | 23.6 | 12 | / | 7.3 | ||
| PC06-01 | 6 | R1/8 | 7.5 | 21.9 | 12 | 4 | 6.9 | ||
| PC06-02 | 6 | R1/4 | 9 | 21.8 | 14 | 5 | 10.7 | ||
| PC06-03 | 6 | R3/8 | 10.5 | 22.5 | 17 | 5 | 20.9 | ||
| PC06-04 | 6 | R1/2 | 12 | 24.1 | 21 | 5 | 35 | ||
| PC08-01 | 8 | R1/8 | 7.5 | 26.6 | 14 | 5 | 10.8 | ||
| PC08-02 | 8 | R1/4 | 9 | 24.3 | 14 | 6 | 10.3 | ||
| PC08-03 | 8 | R3/8 | 10.5 | 24.1 | 17 | 6 | 19.2 | ||
| PC08-04 | 8 | R1/2 | 12 | 25.6 | 21 | 6 | 33.3 | ||
| PC10-01 | 10 | R1/8 | 7.5 | 28.7 | 17 | 5 | 15.3 | ||
| PC10-02 | 10 | R1/4 | 9 | 30.3 | 17 | 6 | 18.1 | ||
| PC10-03 | 10 | R3/8 | 10.5 | 28.2 | 17 | 8 | 19.7 | ||
| PC10-04 | 10 | R1/2 | 12 | 25.8 | 21 | 8 | 30.3 | ||
| PC12-01 | 12 | R1/8 | 7.5 | 30.2 | 19 | 5 | 19.4 | ||
| PC12-02 | 12 | R1/4 | 9 | 32.5 | 19 | 6 | 21.5 | ||
| PC12-03 | 12 | R3/8 | 10.5 | 30.8 | 19 | 8 | 23.4 | ||
| PC12-04 | 12 | R1/2 | 12 | 28.3 | 21 | 10 | 29.8 | ||
| PC14-03 | 14 | R3/8 | 10.5 | 35 | 21 | / | 30.5 | ||
| PC14-04 | 14 | R1/2 | 12 | 33 | 24 | / | 41.5 | ||
| PC16-03 | 16 | R3/8 | 10.5 | 36.8 | 24 | / | 43.6 | ||
| PC16-04 | 16 | R1/2 | 12 | 36.5 | 24 | / | 43.1 |
O-ring
| MUDELL | A | B | C | D | E | F | H1(Hex) | H2(Hex) | Piż (g) |
| PC04-G1 | 4 | G1/8 | 5.5 | 19.8 | 14 | 12 | 3 | 9.3 | |
| PC04-G2 | 4 | G1/4 | 6 | 19.7 | 17 | 14 | 3 | 15.6 | |
| PC06-G1 | 6 | G1/8 | 5.5 | 24.5 | 14 | 12 | 4 | 10.3 | |
| PC06-G2 | 6 | G1/4 | 6 | 21.3 | 17 | 14 | 5 | 13.7 | |
| PC06-G3 | 6 | G3/8 | 7 | 20 | 21 | 17 | 5 | 20.5 | |
| PC06-G4 | 6 | G1/2 | 9 | 22.9 | 24 | 19 | 5 | 35.8 | |
| PC08-G1 | 8 | G1/8 | 5.5 | 25.6 | / | 14 | 5 | 12 | |
| PC08-G2 | 8 | G1/4 | 6 | 22.7 | 17 | 14 | 6 | 11.6 | |
| PC08-G3 | 8 | G3/8 | 7 | 21.8 | 21 | 17 | 6 | 19.7 | |
| I PC08-G4 | 8 | G1/2 | 9 | 24 | 24 | 19 | 6 | 34.1 | |
| PC10-G1 | 10 | G1/8 | 5.5 | 27.7 | / | 17 | 5 | 16.5 | |
| PC10-G2 | 10 | G1/4 | 6 | 27.8 | / | 17 | 6 | 19.3 | |
| PC10-G3 | 10 | G3/8 | 7 | 26.1 | 21 | 17 | 8 | 19.6 | |
| PC10-G4 | 10 | G1/2 | 9 | 24.9 | 24 | 19 | 8 | 31 | |
| PC12-G1 | 12 | G1/8 | 5.5 | 28.8 | / | 19 | 6 | 18.5 | |
| PC12-G2 | 12 | G1/4 | 6 | 30 | 0 | 19 | 6 | 23.3 | |
| PC12-G3 | 12 | G3/8 | 7 | 28.3 | 21 | 19 | 8 | 26.1 | |
| PC12-G4 | 12 | G1/2 | 9 | 29.3 | 24 | 21 | 8 | 36.4 | |
| PC14-G3 | 14 | G3/8 | 10.5 | 35 | / | 21 | / | 32 | |
| PC14-G4 | 14 | G1/2 | 9 | 33 | 24 | 22 | / | 36.2 | |
| PC16-G3 | 16 | G3/8 | 7 | 33.4 | / | 24 | / | 42.9 | |
| PC16-G4 | 16 | G1/2 | 9 | 34.5 | / | 24 | / | 41.8 |
attenzjoni jekk jogħġbok: Kwotazzjonijiet u kunsinna ta 'oġġetti mhux stokk fornuti fuq talba.Konfigurazzjonijiet u dimensjonijiet soġġetti għal tibdil mingħajr avviż.
Fittings Push-In tal-plastik
| Applikazzjoni | Karatteristiċi | ||
| 1. One-touch ġonot użati fil-pajpijiet pnewmatiċi. | 1. Installazzjoni ta 'malajr, sempliċi u flessibbli, li tiffranka l-ispazju, faċli biex tikkonnettja tubu b'mess wieħed. | ||
| 2. Użati għal varjetà wiesgħa ta 'modi biex jissodisfaw il-ħtiġijiet kollha. | 2. Anke wara l-installazzjoni, id-direzzjoni tat-tubi tista 'tinbidel liberament, il-ħjut għax-xejn kollha huma miksija minn qabel b'Teflon b'rendiment ta' siġill fin. | ||
| Kostruzzjoni | 3. Il-korp tar-ram Ibbanjat fin-nikil jiżgura kontra l-korrużjoni u l-kontaminazzjoni. | ||
 | 4. Fittings huma mgħammra Siegla, O-ring u trattament tat-Teflon fuq il-ħajta. | ||
| Speċifikazzjoni | |||
| Fluwidu | Arja, Vakkum | ||
| Firxa tal-Pressjoni | 0 ~ 1.0 MPa | 0 ~ 150 PSI | |
| Pressjoni Negattiva | -100 Kpa (-750Torr) | -29.5 ln Hg | |
| Pressjoni Max | 1.5 Mpa | 250PSI | |
| Firxa tat-Temperatura | 0 ~ 60 ℃ | 32 ~ 140F | |
| Tubu Applikabbli | PU (Polyurethane) | PA (nylon) | |
PC, Male Connector huwa tip ta 'fittings pnewmatiċi ġeneralment użati, imbotta biex tgħaqqad fittings u timbotta fittings.Konnettur maskili jista 'jiġi kemm esternament issikkat b'wrench ċatt jew socket wrench u aġġustat internament b'wrench Allen.Akkomoda OD ta 'tubi metriċi li jvarjaw minn 4mm sa 16mm, OD ta' tubi ta 'pulzier li jvarjaw minn 1/8″ sa 1/2″.
Applikazzjonijiet:
1.One touch għodda ta 'konnessjoni tat-tip għall-pajp tal-pressjoni tal-arja
2.Various użi skont l-ambjent tal-utent
karatteristiċi:
1) Adattat għal kwalunkwe tubi.
2) Passi faċli biex jitneħħew it-tubi.
3) Ladarba jiddaħħal fil-ġewż, it-tubu ma jinħallx faċilment
4) Il-korp tal-metall miksi bin-nikil jiżgura kontra l-korrużjoni u l-kontaminazzjoni
5) Il-ħjut R u NPT kollha huma siġillanti miksija minn qabel
6) Inserzjoni ta 'tubu ta' malajr u sempliċi
7) Disinn kompatt u ħafif
8) Sistema avvanzata ta 'żamma tat-tubi ppruvata sew
9) Siġill tal-ħajt li jista 'jerġa' jintuża
Medju tax-Xogħol: Arja (L-ebda gassijiet jew likwidi oħra)
Pressjoni tax-xogħol: 0 ~ 150PSI 0 ~ 10bar
Temperatura tax-xogħol: 32 ~ 140 o F 0 ~ 60oC
Tubu Applikabbli: Polyurethane u Nylon
Fittings tat-tubi One touch, Fittings Push in, Fittings tal-arja, Fittings pnewmatiċi, Fittings tat-tubi, Fittings kollha tal-metall push in, Fittings tar-ram, Steckverschraubungen, Pneumatik-Zubehör, Pneumatyka, Drosselrückschlagventile, alle Gewindefittinge mit geradem G-NEUMGEwinÁdede, RACORES, Pneumatique raccord, Raccorderia.
